Graphic

aurora protocol http://www.curtronics.com/Solar/
Post Reply
niele.da
Posts: 5
Joined: Tue Oct 30, 2018 2:52 pm

Graphic

Post by niele.da » Tue Oct 30, 2018 3:30 pm

Hi everyone,
My name is Daniele and you have been following for a long time.
Many congratulations for the excellent program.

I make a premise, I know little about Linux programming and for this I ask in advance for any mistakes made.

I connected a Raspberry pi3 to 2 inverters Abb.
I have a problem with the daily chart because it writes incorrect values at variable hours.
The counter on the right side indicates correct values in a short time

What was wrong with configuring?
I ask you if you could kindly tell me the right commands ..

Thank you very much for the support

Daniele

jeanmarc
Posts: 1858
Joined: Thu Aug 29, 2013 7:16 am

Re: Graphic

Post by jeanmarc » Tue Oct 30, 2018 4:59 pm

:!: Try you com app alone with each inveter(s) before starting 123s and make sure it is reliable.
Check and play with the parameters. You can also use 'comtester' available in mN's comapps_examples for that purpose.

niele.da
Posts: 5
Joined: Tue Oct 30, 2018 2:52 pm

Re: Graphic

Post by niele.da » Tue Oct 30, 2018 5:09 pm

Thanks for your answer..

Doing some tests I saw that the main graph reads the power avg and not the instant one.

In the history of the graphics if I select power array everything is ok.

Is there a possibility to configure the chart?
Sorry if I can not explain well

jeanmarc
Posts: 1858
Joined: Thu Aug 29, 2013 7:16 am

Re: Graphic

Post by jeanmarc » Tue Oct 30, 2018 5:46 pm

123s try 3 times to get the 5min sample, if it can't : It mean your connexion is unreliable. You can pool as fast as 1-2sec for 2 ABB inverters..
I surely won't change the main graph behavior, you can have a null instant power and the next second 2000W.

:idea: Maybe that's your issue

niele.da
Posts: 5
Joined: Tue Oct 30, 2018 2:52 pm

Re: Graphic

Post by niele.da » Tue Oct 30, 2018 6:53 pm

so in the Communication options parameters what do I put?
Now I have -Y5 -l5 -w10 ..

Become -Y3 -l5 -w10 ?? I understood right?

Thanks

jeanmarc
Posts: 1858
Joined: Thu Aug 29, 2013 7:16 am

Re: Graphic

Post by jeanmarc » Tue Oct 30, 2018 7:12 pm

yup :)

niele.da
Posts: 5
Joined: Tue Oct 30, 2018 2:52 pm

Re: Graphic

Post by niele.da » Tue Oct 30, 2018 7:16 pm

;)

But -Y -l -w what meaning? Only for info ..

Very kind

jeanmarc
Posts: 1858
Joined: Thu Aug 29, 2013 7:16 am

Re: Graphic

Post by jeanmarc » Tue Oct 30, 2018 7:28 pm

aurora --help
aurora's README (Who reads that anyway)

niele.da
Posts: 5
Joined: Tue Oct 30, 2018 2:52 pm

Re: Graphic

Post by niele.da » Tue Oct 30, 2018 7:37 pm

:roll: ;)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest