Installation trouble

aurora protocol http://www.curtronics.com/Solar/
Post Reply
morningstar
Posts: 2
Joined: Wed Dec 18, 2013 11:25 am

Installation trouble

Post by morningstar » Wed Dec 18, 2013 11:34 am

Firstly thanks to the authors of Aurora Communicator and 123solar.

I have installed 123solar to monitor an Aurora One inverter 6kw, the system consists of a Raspberrypi, RS485 to USB converter FTDI chip, distro = debian...

I followed the directions here. http://francescopaganelli.blogspot.com. ... solar.html except used the latest version of the 123solar.

Everything seems to be ok, but the 123solar page on my Raspberrypi server does not update al all. I've checked the debug page and everything including the comms is ok.

Everything works ok when I use the aurora command line tool. I have also used auroramon with no trouble.

Any suggestions would be very appreciated.

jeanmarc
Posts: 2022
Joined: Thu Aug 29, 2013 7:16 am

Re: Installation trouble

Post by jeanmarc » Wed Dec 18, 2013 11:47 am

Hi,
Hard to say like this. Maybe past the debug page and scripts/debugmem_read.php here

Walter62
Posts: 32
Joined: Thu Aug 29, 2013 11:40 am
Location: Italia
Contact:

Re: Installation trouble

Post by Walter62 » Wed Dec 18, 2013 12:56 pm

Hi, try to follwing my guide http://walter62.altervista.org/joomla/r ... datalogger, is in italian language but I think you are able to follwing in any case

morningstar
Posts: 2
Joined: Wed Dec 18, 2013 11:25 am

Re: Installation trouble

Post by morningstar » Mon Jun 23, 2014 8:00 am

Walter,

Thanks for the directions. I got my installation running way back in Dec, but now I'm following your guide since my SD card failed to reinstall with the latest version. I'd love to translate your guide to english if you could send me a doc I could edit.

Thanks for the guide.

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests