Page 4 of 10

Re: 123solar 1.8

Posted: Sun May 26, 2019 2:18 pm
by jeanmarc
Hi,

123solar 1.8.3 is out :

- New: Cleaner config version mesg
- New: First and last values of the day available 123s_MEMORY
- Change: Removed last days option
- New : Admin main, add HTTP authentication option. This allow early 123solar's setup via localnetwork without HTTP authentication.
Beware, if you already use authentication, you'll need to connect from your localnetwork and set 'always' option.

Don't forget to check then save your configuration.
See you

Re: 123solar 1.8

Posted: Sun May 26, 2019 4:23 pm
by morreale
jeanmarc wrote:
Sun May 26, 2019 2:18 pm

Beware, if you already use authentication, you'll need to connect from your localnetwork and set 'always' option.
where do you set this? I am thinking this is a configuration change i should have made pre-upgrade. i am now am unable to access the admin page due to this message. i only access the device via localnetwork. thanks in advance and as always great tool!

Image

Re: 123solar 1.8

Posted: Sun May 26, 2019 5:10 pm
by jeanmarc
Hi,
You access your logger via 192.168.x.x or via mylogger.duckduck.org ?

Re: 123solar 1.8

Posted: Sun May 26, 2019 6:45 pm
by morreale
jeanmarc wrote:
Sun May 26, 2019 5:10 pm
Hi,
You access your logger via 192.168.x.x or via mylogger.duckduck.org ?
not sure if this was an answer to my question.

i am wondering what config file i would edit to make the http authentication change to in order to gain access to the admin page now that i have upgraded and am receiving the message.

thanks

Re: 123solar 1.8

Posted: Sun May 26, 2019 6:55 pm
by jeanmarc
@morreale: you should access your logger via it's local IP

Re: 123solar 1.8

Posted: Sun May 26, 2019 11:01 pm
by morreale
jeanmarc wrote:
Sun May 26, 2019 6:55 pm
@morreale: you should access your logger via it's local IP
Image

Re: 123solar 1.8

Posted: Mon May 27, 2019 5:06 am
by jeanmarc
whoops.. go to admin/admin.php then

Re: 123solar 1.8

Posted: Mon May 27, 2019 5:18 am
by morreale
jeanmarc wrote:
Mon May 27, 2019 5:06 am
whoops.. go to admin/admin.php then
perfect...thanks!

Re: 123solar 1.8

Posted: Mon May 27, 2019 1:06 pm
by megamarco83
jeanmarc wrote:
Mon May 27, 2019 5:06 am
whoops.. go to admin/admin.php then
hi jeanmarc, yes it's
but after the update 123solar automatically redict to:
http://192.168.YOUR.IP/123solar/admin

so you can see the message: your webserver allow HTTP authentication....


if you manually redict to:
http://192.168.YOUR.IP/123solar/admin/admin.php
now you are able to set the correct parameters

i do not know if it's a bug or not :-)

Re: 123solar 1.8

Posted: Mon May 27, 2019 1:46 pm
by delfi5
morreale wrote:
Sun May 26, 2019 11:01 pm
jeanmarc wrote:
Sun May 26, 2019 6:55 pm
@morreale: you should access your logger via it's local IP
Image
me too with last update.