Some help needed with the dashboard meters

Talks about metering
framboos
Posts: 23
Joined: Fri Apr 10, 2015 7:43 pm

Some help needed with the dashboard meters

Post by framboos » Thu May 28, 2015 9:20 am

Hi,

Can someone help me with the virtual dashboard meters EIMP, EEXP, ESELFC, I cannot find a sollution? I started with fresh values in Metern from the start from this month.
The live values with the eflowlive command are working well for the EIMP, EEXP, ESELFC but I have problems with the daily and total values.

The EIMP is looking good daily and total.
The EEXP gets everyday at 0.05h a daily value with almost the total of the solar value. So everyday mine daily value rises with a very large ammount. The total amount of the EEXP is in 3 weeks very large.
The ESELFC is wrong in daily and in total value. I don't have any idea how these values gets calculated.

Because I started fresh this month with all the values in MeterN I can also see a huge difference in the total consumption value in the dashboard tab (216,114 kWh) and the readings tab value for the current month (169,651 kWh).

jeanmarc
Posts: 1600
Joined: Thu Aug 29, 2013 7:16 am

Re: Some help needed with the dashboard meters

Post by jeanmarc » Thu May 28, 2015 11:52 am

Hi,
Make sure a virtual meter value didn't passover

framboos
Posts: 23
Joined: Fri Apr 10, 2015 7:43 pm

Re: Some help needed with the dashboard meters

Post by framboos » Thu May 28, 2015 12:11 pm

All virtual meters are configured with : pass over 0 Wh

Is this correct?

jeanmarc
Posts: 1600
Joined: Thu Aug 29, 2013 7:16 am

Re: Some help needed with the dashboard meters

Post by jeanmarc » Thu May 28, 2015 3:05 pm

That could be, i never try it tough.. and i don't use nor work on eflow example sorry.
Make sure the first value and the last value in the csv is correct

framboos
Posts: 23
Joined: Fri Apr 10, 2015 7:43 pm

Re: Some help needed with the dashboard meters

Post by framboos » Thu May 28, 2015 3:34 pm

I think if I know why it keeps adding the large amount of data on EEXP everyday only at 0:05 I have a possible sollution.

Any idea why there is data difference between the readings tab and the total value on the dashboard tab? Don't they get there data from the same csv file?
Last edited by framboos on Mon Jun 01, 2015 7:42 am, edited 1 time in total.

jeanmarc
Posts: 1600
Joined: Thu Aug 29, 2013 7:16 am

Re: Some help needed with the dashboard meters

Post by jeanmarc » Thu May 28, 2015 4:05 pm

Yes it does read from csv. Daily and total meters are updated each minute unlike live values.
You may refresh the page to get latest row.

jeanmarc
Posts: 1600
Joined: Thu Aug 29, 2013 7:16 am

Re: Some help needed with the dashboard meters

Post by jeanmarc » Sat Jun 13, 2015 8:03 am

Hi,

You problem with eflow may be a wrong time/timezone in your system try this test.php page

Code: Select all

<?php
$today = date("H:i:s");
echo "Today is $today \n";
$yesterday = date('Ymd', time() - 60 * 60 * 24);
echo "yesterday was $yesterday ? \n";
?>

framboos
Posts: 23
Joined: Fri Apr 10, 2015 7:43 pm

Re: Some help needed with the dashboard meters

Post by framboos » Sun Jun 14, 2015 12:25 pm

Hi jeanmarc thank you for the response.

I get this from the test.php, I think it's correct.

Today is 13:22:53 yesterday was 20150613 ?

framboos
Posts: 23
Joined: Fri Apr 10, 2015 7:43 pm

Re: Some help needed with the dashboard meters

Post by framboos » Sun Jun 14, 2015 12:37 pm

This Is what I have everyday.

Image

Started with this in the dashboard
http://www.energeticambiente.it/tecnica ... t119621714

Now i'm having this
http://www.energeticambiente.it/tecnica ... t119626053

EIMP is ok but EEXP is not and the ESELFC is calculated from EEXP so it's also wrong.

jeanmarc
Posts: 1600
Joined: Thu Aug 29, 2013 7:16 am

Re: Some help needed with the dashboard meters

Post by jeanmarc » Sun Jun 14, 2015 1:33 pm

Is today hour correct as well ? If not, what "date" returns from a terminal ?

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests